Wood Working/Wood Industry Equipment (Used) Newsgroup

Location: USA, MID-ATLANTIC

WEEKE, "VENTURE 2.5", CNC Machining Center with ATC & C-Axis, BP-011766.
• Travel range: X-Axis is 3,860 mm (151.9 in.), Y-axis is 1,822 mm (71.7 in.), Z-axis is 325 mm (12.7 in.). • Working capacity: X-Axis is 3,250 mm (127.9 in.); Y-axis for routing 1,400 mm (55.1 in.), Y-axis for vert drilling 1,183 mm (46.6 in.), Y-axis for horz drilling 1,151 mm (45.3 in.), Y-axis for grooving 987 mm (38.8 in.); Z1-axis stroke for routing is 300 mm (11.8 in.), Z2-axis stroke for drilling is 185 mm (7.3 in.), Z-axis working cap is 100 mm (3.9 in.). X & Y-axis Travel speed of 110 MPM (361 FPM), Z-axis travel speed of 20 MPM (66 FPM); head travels on THK linear motion guides on all axes. • Boring unit with: (12) Vertical drill spindles, (6) spindles in X-axis & (6) in Y-axis, all vertical spindles have quick change bit system; (6) horizontal spindles with (2+2) in X-axis for T & B edge boring, (1+1) in Y-axis for front & back edge boring, variable spindle speed from 1,500 - 7,500 RPM, all vertical drills have ''quick change'' bit holders; NC controlled 0 - 90 degree ''X-Y'' grooving saw, 125 mm dia. saw blade. • Equipped with: 12 HP (9 kW) air cooled electro-spindle router with HSK F63 adaptor, powered by a frequency inverter w/programmable 1,250 - 18,000 RPM (9,000 RPM + constant torque), RH or LH rotation; ''C'' axis for NC controlled 360 degree horizontal processing; 14-position ATC tool changer magazine. • Worktable: (6) Moveable tubeless supports w/side mounted raise-and-lower panel feeding rails, (10) standard vacuum pods 160 x 114 mm, (4) small vacuum pods 125 x 75 mm. • Laser-guided positioning of support rails & vacuum pods; (6) pneumatic backstops, (2) pneumatic side stops create (2) working zones. • Includes WEEKE ''PC-85T Power Control'' Windows based operating system with: Windows software & WoodWOP 5.0 programming software. • 17 in. TFT Monitor, industrial keyboard for data entry, CD R/W, 40 GB hard drive, modem, USB slots, RS-232 serial interface for simple PC connection is possible, 10/100 Ethernet connection. • NUM Programmable logic control operating system for axes linear, circular & helical interpolation; fiber optic cabling, BECKOFF controls all mounted in separate free-standing control panel. • Complete with: 100 cbm/Hr BECKER Vacuum Pump, 2-zone safety mats (will stop machine if operator enters work area), safety fencing. • Actual model is Weeke Venture 2.5 – [Ref. BP-01176] Nice & Clean Late Model...ready for delivery & with ''ALL'' the bells & whistles! YMFG - 2006 FOB – Mid-Atlantic Very Good Condition USD 69,700